1. Put it in a ventilated place. 2. Put it in a relativ […]
1. Put it in a ventilated place.
2. Put it in a relatively dry place with high temperature.
3. Choose a cement model with a fast setting speed.
Cement crafts production process:
1. Make a model with the mesh, that is, the "prototype";
2. Pour potassium soapy water on it as a release agent;
3. Use a mixed white cementChina cement handicrafts Company slurry to pour on the prototype. For larger models, a sheath can be placed on the outer ring, and the soil inside can be dug out after the white cement dries hard. If the structure of the prototype is complex, a dividing line needs to be made. The dividing line must be at the high point of the prototype, and the outer white cement block is divided into several pieces to demould;
4. Use potassium soap solution to evenly coat the inside of the white cement mold, and then pour the white cement slurry into the white cement mold. Tap the white cement mold to make the bubbles in the white cement slurry emerge;
5. The mold can be separated from the mold (can be used multiple times). You must also be very careful when breaking the shell so as not to damage the finished product.